The Mainly Tips to Install the Vibrating Feeders on Different Production Line

Vibrating feeder is usually used for uniform feeding, cloth according to be installed on different production line to ensure the stability of the connection between devices. When the feeder model is small, the driven device can be set two vibrating motors, if the model is large, the driven device can be set motor with vibrator exciter.

1.According to the customer's site environmental conditions and layout can be designed feeder hanging and sitting two installation methods.

When it is used in the following copper warehouse, hoppers, etc., there is no suitable feeder space when installed base.Then the four corners of the feeder can be used to hang in suspension under the hopper, space-saving layout can effectively feed between warehouse and by feeding equipment.

2.If the customer has requested, vibrating feeder can be designed to sit-in installation, installation to the actual arrangement of the embedded foundation.

3.If you feed a very fine dust and other materials used in the particle size uniform, vibrating feeder can be designed to seal cover with dust ports, link to the system filter, dust sealed to protect the environment.

4.If you have other special requirements, this feeder can be non-standard design process to meet some requirements.

More information,welcome to contact us via info@pkmachinery.com or www.pkmachinery.com

vibrating feeder

How to Install the Circular Vibrating Screen Punching Mesh?

Screen meshes Includes manganese steel woven mesh screen, perforated plate, stainless steel sieve, etc., each of which has its own special place, and therefore it should be selected according to the actual situation.Here we will share some of the easy to implement tips to install the circular vibrating screen punching mesh.
Vibrating mesh sieve punching method of installation with slime mesh sieve dehydration installation is similar. Entire slime dewatering screen is horizontal assembled, but in order to ensure the dehydration effect of the machine, so the screen is negatively corner installation. Alternatively polyurethane screen mesh, tension mounted, or stainless steel weld seam sieve, pressing installation, to meet different needs. But the circular vibrating screen is angled, when using perforated screen, pressing need for the use of square wood, wedge tensioning way.

manganese steel woven wire mesh

Insufficient tightness of the screen will cause the following effects:
① mesh bending deformation, stress concentration serious, relaxation is easy to produce secondary vibration sieve, sieve premature breakage under alternating stress, caused no small economic loss;
② bending deformation affecting mesh sieve through effective screening area, so this should be through the sieve through the sieve material failed, resulting in reduced screening efficiency;
③ screen surface depressions lead to material retention, hinder the forward movement of the material layer, and ultimately affect the productivity of the shaker.

In view of this, increasing the tension of the screen, to ensure smooth screen surface, not only can effectively improve screen life, but also help to ensure the efficiency and productivity of vibrating sieve.

stainless steel screen plate manufacturers

Installation and Commissioning of YA Circular Vibrating Screen

1.Before installation,please refer to the installation drawing of concrete foundation, embedded anchor bolts or embedded steel plate ,the flatness error should be less than 3mm.
2.After the completion of installation, please check and adjust the levels of spring to make sure supporting position is under uniform stress. The motor axis should be 3-5mm lower than the axis of the vibrator, the height of support spring symmetric point should be equal (error ≤ 3 mm).
3. Each part of the vibrating screen should be firmly connected, all bolts should be tightened before start running.
4. Adjust the eccentric vibrator angle which can realize the adjustment of the excitation force, so as to adjust the amplitude of vibrating screen.
5. The distance between the vibrating screen and other obstacles should be less than 100mm.
Further information please click: www.pkmachinery.com  

Circular Vibrating Screen