The Mainly Tips to Install the Vibrating Feeders on Different Production Line

Vibrating feeder is usually used for uniform feeding, cloth according to be installed on different production line to ensure the stability of the connection between devices. When the feeder model is small, the driven device can be set two vibrating motors, if the model is large, the driven device can be set motor with vibrator exciter.

1.According to the customer's site environmental conditions and layout can be designed feeder hanging and sitting two installation methods.

When it is used in the following copper warehouse, hoppers, etc., there is no suitable feeder space when installed base.Then the four corners of the feeder can be used to hang in suspension under the hopper, space-saving layout can effectively feed between warehouse and by feeding equipment.

2.If the customer has requested, vibrating feeder can be designed to sit-in installation, installation to the actual arrangement of the embedded foundation.

3.If you feed a very fine dust and other materials used in the particle size uniform, vibrating feeder can be designed to seal cover with dust ports, link to the system filter, dust sealed to protect the environment.

4.If you have other special requirements, this feeder can be non-standard design process to meet some requirements.

More information,welcome to contact us via info@pkmachinery.com or www.pkmachinery.com

vibrating feeder

Should You Adjust The Excitation Force of Vibration Feeder?

When customers purchase feeder motor, because of the pre-supplied parameters and reality production material particle size, amount per hour occurs an error, so the customer can change the motor exciting force own according to the following description, making the process variation change.But is it necessary to adjust?
Each brought in shaft vibration motor eccentric block has a fixed and an adjustable eccentric, users can adjust the excitation force according to change the adjustable and fixed eccentric eccentric angle.You can see table 1.The different excitation force when angle different,you can see the table 2.

Table1:

Table 2:

Adjustable eccentric block rotation angle	0°	60°	90°	120°
excited force	F	0.866F	0.707F	0.5F

When adjusting the vibration motor excitation force, please disconnect the power supply before adjusting the vibration motor excitation force.What should pay attention to is that when you adjust the excitation force two vibration motor eccentric position consistent tone to avoid the phenomenon discovered the emphasis on feeder according to the damage depth.It is generally useless to adjust the excitation force is needed, please do not attempt to open the vibration motor,adjust the eccentric angle.

vibration feeder

The Cautions of Vibrating Feeder You Should Know

The Cautions of Vibrating Feeder You Should Know

How much do you know the vibrating feeder?Vibrating feeder is a kind of continuous uniform feeding equipment.It is widely used in in metallurgy, coal mine, dressing, building materials, chemical industry, grinding, etc.Here we will introduce the vibrating feeder what you should notice a lot.

vibrating feeder

For the user,In order to prolong the service life of the machine, ensure the machine can work normally, the user should do daily maintenance and repair work regularly.The following two aspects will show you how to maintain through apply proper lubricant.

1, The machine is normally use thin oil splash lubrication, according to the use of locations, the temperature conditions, lubricating oil should be put into use reasonable, usually with gear oil

2, Ensure that the vibrator is thin oil oil is higher than the standard height (by joint bend charging), And the oil must be replaced every three to six months time, when the oil change application of clean gasoline or kerosene cleaning tank, bearing raceway and gear surface regularly

vibrating feeder

In the process of operation,  you need to pay attention to the following security technology.

1,Operators can mount guard after the security technology education

2,Consolidate all bolts, to prevent the occurrence of loose in the running process

3,If discovery is unusual, please stop immediately repair

4,Operating personnel prohibited near the machine when the machine is running, touch the body, adjust, form, such as cleaning or inspection

5,Make sure the wires machinery and equipment safety, always check the electrical wiring for wear and leakage

vibrating feeder

Henan Pingyuan Mining Machinery Co., Ltd is the most professional manufacturer of Belt conveyor, and Vibrating screen, Bucket elevator, Screw conveyor, Scraper conveyor using the world's most advanced technology, we are willing to serve every company to meet your custom needs. our goal is "be the future global leader of mining machinery industry". have any questions, please contact us without any hesitation. 

Tel: +86 373 579 9198

Fax: +86 373 507 1699  

info@pkmachinery.com  

website:www.pkmachinery.com

Address: 289 Yellow River Road, Xinxiang City, Henan Province, China

Vibrating Feeder---A kind of linear direction feeding equipment

►Customer reference list

CUSTOMER REFERENCE LIST (YEAR 2012-2014)
NO.	EQUIPMENT	VENDOR'S SCOPE OF SUPPLY	QUANTITY	TIME
		PROJECT LOCATION
29	Vibrating Feeder	Vietnam	2 Sets	20131107
54	Vibrating Feeder	Pakistan	2 Sets	20140220

► Brief introduction:
Vibrating Feeder is a kind of linear direction feeding equipment, It consists of feed spout, vibration body, vibrating motor, damping device. It can feed material for belt conveyor, vibrating conveyor, bucket elevator, vibrating screen, crusher etc.

► Working principle:The feed process of the vibrating feeder is achieved by the feed spout do line reciprocating vibration periodically which is forced by the special vibrating motor. When the vertical component of the feed spout vibration accelerated speed is bigger than the gravitational acceleration, the material will be upthrow and jumping forward along a parabolic path. Because of the continuous exciting of the vibrating motor, the feed spout will
Vibrating continuously and the material in the feed spout will jumping forward continuously, so that achieves the purpose of feeding material.

► Features:

   1.Smooth operation, large feeding capacity with high efficiency.
   2.Low energy consumption.
   3.Characterized by even feeding, excellent continuity and adjustable vibrating force.
   4.Eccentric block as the main source of vibration.
   5.Double screening and embodies the functions of dirt removing, screening and feeding.

► Advantage:
      Stable vibration, reliable operation and long service life;
      The excitation force and materials quantity moving in the feeder can be adjusted conveniently and easily.
      The vibrating motor, as the excitation source, has low noise, small power consumption, good adjusting performance and without material splash.
      Simple structure, reliable running, convenient installation, light weight, small size, easy maintenance, and the enclosed type can prevent dust pollution.

► Application:

      ZG Vibrating Feeder is a kind of linear direction feeding equipment, which is widely used in pharmaceutical, automotive, electronic, food processing, packaging, glass, steel, construction, recycling, plastic industry etc.
 

► Operation and Maintenance:

      A.Problems occurring in Vibratory Feeders
Four basic malfunctions that bring attention to vibratory feeders need to be concern:
    1.Declining feed rate due to low amplitude. This will occur gradually over a period of time.
    2.A dead spot in the bowl – parts will not feed past a certain point in the bowl, even though they are moving elsewhere in the bowl.
    3.Intermittent operation. The feeder will spontaneously run at excessive amplitude or possibly no amplitude without apparent cause. Included in this category is for a feeder not to work at all.
    4.Noise from the vibrating feeder.

       B.Overhaul and Readjustment of Vibratory Feeders

   Here are the methods to solve the problems:
       1.Remove the bowl, and clean the mating surfaces between the bowl and the top casting of the base.
      These surfaces can accumulate dirt, sometimes, and other material that will make it difficult to draw the bowl tightly down on the top casting of the base. These surfaces should be flat and clean. Using emery paper or a flat file is adequate to recondition the surface.
      2.Operating on one bank of springs at a time, loosen the springs top and bottom and remove them.
      Both ends of each springs, as well as the spacers and mounting surfaces should be thoroughly cleaned with either emery paper, a wire brush or glass bead shot peened.
    3.Examine each spring for cracks and corrosion
The cracks will always occur adjacent to the hole punched in either end, on this type of spring. Sometimes these cracks are not visible to the naked eye, and a simple test is to hit the spring on something solid (dropping it on the floor). Usually this will cause the spring to break thru.
    - Any pitted springs or spaces should be replaced.
    - Reassemble the springs and spaces in the manner in which they were prior to disassembly.
    - Draw up the screw snug.
    - Do this on each remaining banks of springs.

vibrating feeder for sawdust to Thailand

Vibratory feeders(as known as vibrating feeders,vibration feeders) is suitable for metal and coal feeding system. The materials will be discharged evenly onto the belt conveyor from bunker by using vibratory feeders and will form into a appropriate thickness and width of material layer. Applicable materials can be coal, ore, sandstone, sandy soil and other powder raw materials in food and chemical plant.

The feeding process of vibratory feeders is achieved by the feeding chute doing linear reciprocating vibration periodically which is forced by the special vibrating motor. When the vertical weight of the feeding chute vibration accelerated speed is bigger than the gravitational acceleration, the material will be upthrown and jumped forward along a parabolic path. The feeding chute will vibrate and the material inside the feeding chute will jump forward continuously due to the continuous exciting of the vibrating motor, so that it can achieve the purpose of material feeding. 

The characteristics of thevibratory feeders mainly include the following parts:

1. It can easily control the discharge capacity. You can also control the discharge capacity (tons/hour) by using a inverter.
2. It applies to a wide range of materials, such as powder, granule, block and other materials.
3. Low maintenance cost , because of adopting resonance principle, so the vibration feeder has less power consumption and less wear characteristics.
4. It can be used in special conditions: according to different working condition, the vibrating feeder can be equipped with dust cover, liner plate, sealing part etc.
5. Smooth vibration and reliable operation.
6. Special grid design which can prevent material blockage. The clearance between grids can be adjustable.
7.Frequency conversion motor is optional, you can change the capacity by adjusting the motor frequency which is easy to control the feeding rate without starting motor frequently.

vibrating feeder for sawdust to Thailand 

If you want to know more information about the production of PK machinery,please payacloseattentionto anneguo@linkedin.Thank you! E-mail:anneguo329@gmail.com  Skype:pkmachinery09

The advantages and Principles of Vibratory Feeders

Vibratory feeders(as known as vibrating feeders,vibration feeders) is suitable for metal and coal feeding system. The materials will be discharged evenly onto the belt conveyor from bunker by using vibratory feeders and will form into a appropriate thickness and width of material layer. Applicable materials can be coal, ore, sandstone, sandy soil and other powder raw materials in food and chemical plant.

 Working principle:

The feeding process of vibratory feeders is achieved by the feeding chute doing linear reciprocating vibration periodically which is forced by the special vibrating motor. When the vertical weight of the feeding chute vibration accelerated speed is bigger than the gravitational acceleration, the material will be upthrown and jumped forward along a parabolic path. The feeding chute will vibrate and the material inside the feeding chute will jump forward continuously due to the continuous exciting of the vibrating motor, so that it can achieve the purpose of material feeding. 

The characteristics of the vibratory feeders mainly include the following parts:

1. It can easily control the discharge capacity. You can also control the discharge capacity (tons/hour) by using a inverter.
2. It applies to a wide range of materials, such as powder, granule, block and other materials.
3. Low maintenance cost , because of adopting resonance principle, so the vibration feeder has less power consumption and less wear characteristics.
4. It can be used in special conditions: according to different working condition, the vibrating feeder can be equipped with dust cover, liner plate, sealing part etc.
5. Smooth vibration and reliable operation.
6. Special grid design which can prevent material blockage. The clearance between grids can be adjustable.
7.Frequency conversion motor is optional, you can change the capacity by adjusting the motor frequency which is easy to control the feeding rate without starting motor frequently.

If you want to know more information about the production of PK machinery,please pay a close attention to anneguo@linkedin.Thank you! E-mail:anneguo329@gmail.com  Skype:pkmachinery09