1.In order to fix rotary vibrating screen equipment during the process of transportation, the bolts will be added with the means of transport. However, the bolts that connected to rotary vibrating screen equipment might be left and causing noise during operation.
Solution: remove the bolts
2.The clamp bolts are not tighten.
Solution: check and tighten up the clamp bolts.
3.The clamp bolts are not completely jointed.
Solution: open and re-joint the clamp bolts, ensure the clamp bolts are jointed completely.
4.Due to the operation of rotary vibrating screen, the plate that is used for supporting the bouncing ball might be deviated from its place or it might be damaged.
Solution: re-locate the plate to its original place if it is deviated, or replace a new place if it is damaged.